Codelab-at-a-conference setup

By using a kiosk at Google I/O, a test project has been created and can be accessed by using going to:

These temporary accounts have existing projects that are set up with billing so that there are no costs associated for you with running this codelab.

Note that all these accounts will be disabled soon after the codelab is over.

Use these credentials to log into the machine or to open a new Google Cloud Console window Accept the new account Terms of Service and any updates to Terms of Service.

When presented with this console landing page, please select the only project available. Alternatively, from the console home page, click on "Select a Project" :

Start Cloud Shell

While Google Cloud can be operated remotely from your laptop, in this codelab you will be using Google Cloud Shell, a command line environment running in the Cloud.

Activate Cloud Shell

  1. From the Cloud Console, click Activate Cloud Shell .

If you've never started Cloud Shell before, you'll be presented with an intermediate screen (below the fold) describing what it is. If that's the case, click Continue (and you won't ever see it again). Here's what that one-time screen looks like:

It should only take a few moments to provision and connect to Cloud Shell.

This virtual machine is loaded with all the development tools you'll need. It offers a persistent 5GB home directory and runs in Google Cloud, greatly enhancing network performance and authentication. Much, if not all, of your work in this codelab can be done with simply a browser or your Chromebook.

Once connected to Cloud Shell, you should see that you are already authenticated and that the project is already set to your project ID.

  1. Run the following command in Cloud Shell to confirm that you are authenticated:
gcloud auth list

Command output

 Credentialed Accounts
*       <my_account>@<>

To set the active account, run:
    $ gcloud config set account `ACCOUNT`
gcloud config list project

Command output

project = <PROJECT_ID>

If it is not, you can set it with this command:

gcloud config set project <PROJECT_ID>

Command output

Updated property [core/project].

Before you can begin using the Secret Manager API, you must enable the API. Using Cloud Shell, you can enable the API with the following command:

gcloud services enable

You should see output like this:

Operation "operations/acf.cc11852d-40af-47ad-9d59-477a12847c9e" finished successfully.

Install the Secret Manager Client Library:

pip3 install --user google-cloud-secret-manager==2.0.0

For part of this tutorial, you'll use an interactive Python interpreter called IPython, which is preinstalled in Cloud Shell. Start a session by running ipython in Cloud Shell:


You should see something like this:

Python 3.7.3 (default, Jul 25 2020, 13:03:44)
Type 'copyright', 'credits' or 'license' for more information
IPython 7.18.1 -- An enhanced Interactive Python. Type '?' for help.

In [1]:

A secret contains one or more secret versions. They can be created using the gcloud command-line, but they can also be created using Python.

In order to use a secret, you first need to create the secret with the name of the secret, then you add a version of the secret, being the value of the secret.

Set your Project ID within IPython:


Create a secret

Copy the following code into your IPython session:

from import secretmanager

def create_secret(secret_id):
    # Create the Secret Manager client.
    client = secretmanager.SecretManagerServiceClient()

    # Build the resource name of the parent project.
    parent = f"projects/{PROJECT_ID}"

    # Build a dict of settings for the secret
    secret = {'replication': {'automatic': {}}}

    # Create the secret
    response = client.create_secret(secret_id=secret_id, parent=parent, secret=secret)

    # Print the new secret name.
    print(f'Created secret: {}')   

Call the function to create a new secret called my_secret_value:


You should see the following output:

Created secret: projects/<PROJECT_NUM>/secrets/my_secret_value

Add a secret version

Now that the secret exists, you can assign it a value by creating a version.

Copy the following code into your IPython session:

def add_secret_version(secret_id, payload):
    # Create the Secret Manager client.
    client = secretmanager.SecretManagerServiceClient()

    # Build the resource name of the parent secret.
    parent = f"projects/{PROJECT_ID}/secrets/{secret_id}"

    # Convert the string payload into a bytes. This step can be omitted if you
    # pass in bytes instead of a str for the payload argument.
    payload = payload.encode('UTF-8')

    # Add the secret version.
    response = client.add_secret_version(parent=parent, payload={'data': payload})

    # Print the new secret version name.
    print(f'Added secret version: {}')   

Call the function to create a add a new secret version:

add_secret_version("my_secret_value", "Hello Secret Manager")

You should see the following output:

Added secret version: projects/<PROJECT_NUM>/secrets/my_secret_value/versions/1

Secrets can have multiple versions. Call the function again with a different value:

add_secret_version("my_secret_value", "Hello Again, Secret Manager")

You should see the following output:

Added secret version: projects/<PROJECT_NUM>/secrets/my_secret_value/versions/2

Notice how the new version of our secret is significantly longer than our original. This attribute will be referenced later.

Accessing a secret version returns the secret contents, as well as additional metadata about the secret version. When you access a secret version, you can either specify a specific version, or just ask for the latest version by specifying "latest".

Secrets should be kept secret. Store database credentials as secrets then use them to authenticate, or store certifications and use them; but do not directly print out your secrets, as this defeats the purpose of keeping them secret.

You're going to perform operations on our secrets, assessing its value without printing it out directly. Instead you'll print out a hash of the value of the secret.

Copy the following code into your IPython session:

def access_secret_version(secret_id, version_id="latest"):
    # Create the Secret Manager client.
    client = secretmanager.SecretManagerServiceClient()

    # Build the resource name of the secret version.
    name = f"projects/{PROJECT_ID}/secrets/{secret_id}/versions/{version_id}"

    # Access the secret version.
    response = client.access_secret_version(name=name)

    # Return the decoded payload.
import hashlib

def secret_hash(secret_value): 
  # return the sha224 hash of the secret value
  return hashlib.sha224(bytes(secret_value, "utf-8")).hexdigest()

Call the function to retrieve the secret as a hash of it's value:


You should see output that resembles a hash (the exact value may not match this output):


Since you did not specify a version, the latest value was retrieved.

Call the function adding the expected version number to confirm:

secret_hash(access_secret_version("my_secret_value", version_id=2))

You should see the same output as the last command:


Call the function again, but this time specifying the first version:

secret_hash(access_secret_version("my_secret_value", version_id=1))

You should see a different hash this time, indicating a different output:


You can make use of secrets within many parts of Google Cloud. In this section, you'll focus on Cloud Functions, Google's event-driven serverless compute offering.

If you are interested in using Python in Cloud Functions, you can follow the HTTP Google Cloud Functions in Python Codelab.

Close IPython by calling the exit function:


You should be returned to your Cloud Shell:

yourname@cloudshell:~ (<PROJECT_ID>)$

Before you can begin using the Cloud Functions API, you must enable the API. Using Cloud Shell, you can enable the API with the following command:

gcloud services enable

Create a new folder to build our function, creating empty files to write to:

mkdir secret-manager-api-demo
cd secret-manager-api-demo
touch requirements.txt

Open the code editor from the top right side of the Cloud Shell:

Navigate to the file inside the secret-manager-api-demo folder. This is where you'll be putting all your code.

While storing and retrieving secret values from the command line or IPython terminal is useful, it's much more useful to be able to access these secrets within a function.

Using the access_secret_version function you created earlier, you can use that as a base for your Cloud Function.

Copy the following code into the file:

import os

from import secretmanager

project_id = os.environ["GCP_PROJECT"]

client = secretmanager.SecretManagerServiceClient()
name = f"projects/{project_id}/secrets/my_secret_value/versions/latest"
response = client.access_secret_version(name=name)
my_secret_value ="UTF-8")

def secret_hello(request):
    if "Again" in my_secret_value:
        return "We meet again!\n"

    return "Hello there.\n"

Before you can deploy your function, you need to finalize the setup of the environment. This requires that you set up your function dependency.

Create a new file called requirements.txt, and add the google-cloud-secret-manager package to it:



You should now have a folder containing just a and a requirements.txt.

Allowing access to your secret

Before you can deploy your function, you need to allow Cloud Functions the ability to access your secret.

Switch back to the terminal:

Grant access to the Cloud Functions Service Account to access your secret:

export PROJECT_ID=$(gcloud config get-value core/project)

gcloud secrets add-iam-policy-binding my_secret_value \
    --role roles/secretmanager.secretAccessor \
    --member serviceAccount:${PROJECT_ID}

You should see the following output:

Updated IAM policy for secret [my_secret_value].
- members:
  - serviceAccount:<PROJECT_ID>
  role: roles/secretmanager.secretAccessor
etag: BwWiRUt2oB4=
version: 1

Given your setup in the previous sections, you can now deploy and test your Cloud Function.

Within the folder containing just the two files you created, deploy the function:

gcloud functions deploy secret_hello \
    --runtime python37 \
    --trigger-http \

You should see the following output (truncated):

Deploying function (may take a while - up to 2 minutes)...done.


entryPoint: secret_hello
  url: https://<REGION>-<PROJECT_ID>
status: ACTIVE

Retrieve the URL of your function (httpsTrigger.url metadata) with the following command:

FUNCTION_URL=$(gcloud functions describe secret_hello --format 'value(httpsTrigger.url)')

Now, test the function can be accessed with the expected return value, by calling your function:


You should see the following output:

We meet again!

You learned how to use the Secret Manager API using Python!

Clean up

To avoid incurring charges to your Google Cloud account for the resources used in this tutorial:

Learn more


This work is licensed under a Creative Commons Attribution 2.0 Generic License.